Blank, black, striped, double vision, spots, lines print light print black, blurry, peeling / faded

Most of these problems are related to the toner cartridge. If you do not try another cartridge, you can diagnose the problem another way. Place a sheet of paper in tray 1. Perform a configuration page by hand on the power switch. If the page has reached the middle, turn off the camera. You might need to do a few times to get the timing right. Now you have the paper stopped halfway, carefully remove the cartridge and the paper machine. Check if the problem exists before it reaches the fuser. If this is the case, then it is in the cartridge or maybe it could be at the Assembly laser scanner, or to be. If not, then you have a bad fuser. Remove the fuser and check.

cartridge problems are the most common cause of image problems. I found more problems with the remanufactured cartridges because the manufacturer does not replace, is certain to cause major components of defects. Make sure you replace the drum. In addition, look for companies with ISO 9002/14001 and STMC certified. This will, unwanted weeds from the cartridge. To be honest, I do not see a lot of OEM cartridges. Cartridge fail for several reasons, such as foreign bodies to stand in the lines of the cartridge, streaks and leaks. This can be done by taking care to respect or not resolved to remove the clips in and around the machine. You should clean your machine. Vacuum all paper and toner dust can Help in the fall. Do not forget the emptiness of service that can handle the small size of toner particles.

You always print a configuration page, and here are a few reasons.

test image quality, the page number, serial number of the machine, configure the printer, the last error, Jet Direct print server card is installed, many others …

Here are some instructions on how to print a configuration page.

If you do not see your model in the scroll menu on your printer and it should be easy to find.

1 Press [Menu] until the menu information.

2 Press] [Articles, until you see Configuration PRINT.

3 Press [Select] to print the configuration page.

1 Press (SELECT button) or the Menu button to open the menu.

2 Use (UP button) or (Down arrow) to scroll the information and press the Check (Select)

3 Use or to scroll to the configuration Print, then press the CHECK button.

1 Press MENU until MENU appears on the information.

2 Press ITEM until Print Configuration appears.

3 Press SELECT to the configuration pages are printed.

The symptoms are not melting the toner, tapes, double imaging.

Series 4200-ripped a problem with the film. You will see strands of plastic parts from the exit area. It will be a default image, Schlieren imaging and double-click.

side, a configuration to diagnose. Rub on the print server. Is it flakey? If the pressure rub off easily? If so, it is probably the fuser. Remove and. You can use the film or roller. If you have a crash replacement is necessary.

Most of the fixative on HP laser printers are easy to remove. If you instructions for removal and installation needed, I maintenance procedures kit on my site on the front page. Look in the menus to customers.

Solution – The fuser is replaced as a whole. Remove and replace the fuser

out of the oven to cool before disassembly.

If you replace your cartridge and you still have light print or if you have a slight pressure on the whole page, you can have in economy mode. On the menu of quality on and off. I would also try the transfer roller. It is also easy to replace, look in the facility maintenance kit.

If you have already tried all it could be another problem. This procedure can be repaired for the average person difficult. He is cleaning the scanner or laser unit. If you are in a very dusty mirror inside of this assembly may be dirty. When the mirror prints accumulation of dust on them, the light of the default image. I go into details on cleaning the LJ HP 4000 scanner on another article that I have. If you prefer, you can go to my site in my section and the section check it out.

I hope this article helped you save some of your hard earned money. There’s really no reason to spend money if you just clean it yourself!